In the following packet tracer activity we review the basic configurations and functions of RIPv2. Including discontigous networks and using VLSM to subnet it. Since we are configuring a classless routing protocol then commands such as show ip route, debug ip rip, as well as show ip interface brief. It is also encouraged to set the timers, all in all RIPv2 configurations are similar to RIPv1. Although it is classless, basically the strengths of the RIP protocol are enhanced but the flaws remain evident. That means that you will have to work around the 15 and 16 hop count to infinity. Verification as well as troubleshooting should be simple at this point, so pinging should come naturally. The rest of this lab is configuring the network ip's and subnet mask according to the procedure.
No comments:
Post a Comment